Overall: 49 in. (124.5 cm) with chute up Tire-to-Tire: 41 in. (104 cm)
Weight
537 lbs. (244 kg)
Turning Radius
True zero radius, turns within its own length; counter-rotating, independent drive wheels
Mowing Width
40.4 in. (103 cm)
Mowing Height Range
1 - 4.5 in. (3.81 - 11.4 cm)
Mowing Height Adjustment
0.25 in. increments; foot-operated; pin for setting height, detent for transport position
Fuel Capacity
3 gal. (11.3 l)
ENGINE
Engine Make
Briggs & Stratton or Honda
Fuel Type
Unleaded gasoline with 87 or higher octane
Cylinders
1
Horsepower
17.5 hp
Displacement
31 ci
Torque
24.6 ft. lbs. @ 2,400 rpm
Starter
12V
Cooling
Air, fly-wheel fan
Ignition
Electronic
Battery
12V, 9A charging system
Air Cleaner
Dual-element air cleaner for excessive, dirty applications and improved performance
DRIVETRAIN
Transmission/Drive
Dual hydrostatic; Hydro-Gear EZT integrated hydrostatic zero-turn transaxles; hydrostatic system operates on 20W50 motor oil / V-belt drive from engine crankshaft
Tires Front: 11 x 4-5, rib tread Drive: 18 x 8.5-8, turf tread
Brakes
Service: Hydrostatic dynamic braking Parking: Sprocket and cog (when steering levers are placed in neutral position, integral park brakes are automatically engaged)
BODY
Frame
1.5 x 1.5 x 0.120 in. (3.8 x 3.8 x 0.34 cm) square steel tubing
Seat
Molded vinyl, standard seat suspension springs
Seat Adjustment
Fore and aft
OPERATIONAL
Steering
Twin-lever SmoothTrak™ steering provides independent control of each drive wheel; speed, forward, reverse, brake, and turns are all controlled with hand-operated controls
Safety Features
Operator presence system connected to clutch, seat, and park brakes
OTHER
Deck Construction
11 ga., 0.120 in. (0.30 cm) welded steel with 11 ga., 0.120 in. (0.2667 cm) doubler welded onto spindle mount areas; solid 1 x 0.25 in. (2.54 x 0.64 cm) steel bars reinforce impact areas on trim edges; steel deck housing is 4 in. (10.16 cm) deep to provide room for high capacity mowing
Spindles
Die cast aluminum housing, 1 in. (2.5 cm) diameter high carbon steel shafts and sealed ball bearings
Blades
2 heavy-duty, heat-treated, high-lift steel blades; 20.5 x 2.5 x 0.20 in. high sail blade
Blade Tip Speed
18,100 fpm
Discharge
Side; molded plastic chute
Deck Lift
Raise and lower deck from driver’s seat with simple foot-operated deck height adjustment; pin for setting height, transport position; change cutting heights, hop curbs and trailer more easily
Photos may show optional equipment
*Price, if shown, is subject to change without notice and does not include government fees, taxes, dealer vehicle freight/preparation, dealer document preparation charges or any finance charges (if applicable). Final actual sales price will vary depending on options or accessories selected. NOTE: Vehicles with a price of "Request a Quote" are always included in a $0 search, regardless of actual value.
If you are looking for a V-Rod®, and you haven't checked with us, you are probably going to pay too much! Give our Harley Sales Team
a call at 1-888-475-2243 for more information.
